UPD78F0386GK-8EU-A Renesas Electronics America, UPD78F0386GK-8EU-A Datasheet - Page 531

• Manufacturer Part Number: UPD78F0386GK-8EU-A
• Description: MCU 96KB FLASH 5KB RAM
• Manufacturer: Renesas Electronics America
• Series: 78K0/Lx2r

Specifications of UPD78F0386GK-8EU-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LCD, LVD, POR, PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

(2) When detecting level of input voltage from external input pin (EXLVI)
When starting operation
When stopping operation
Either of the following procedures must be executed.
<1> Mask the LVI interrupt (LVIMK = 1).
<2> Set bit 2 (LVISEL) of the low-voltage detection register (LVIM) to 1 (detects level of input voltage from
<3> Set bit 7 (LVION) of LVIM to 1 (enables LVI operation).
<4> Use software to wait for an operation stabilization time (10 s (MAX.)
<5> Wait until it is checked that (input voltage from external input pin (EXLVI)
<6> Set bit 1 (LVIMD) of LVIM to 1 (generates internal reset signal when input voltage from external input pin
Figure 24-6 shows the timing of the internal reset signal generated by the low-voltage detector. The numbers
in this timing chart correspond to <1> to <6> above.
Cautions 1. <1> must always be executed. When LVIMK = 0, an interrupt may occur immediately
When using 8-bit memory manipulation instruction:
Write 00H to LVIM.
When using 1-bit memory manipulation instruction:
Clear LVIMD to 0 and then LVION to 0.
external input pin (EXLVI)).
1.21 V (TYP.))) by bit 0 (LVIF) of LVIM.
(EXLVI) < detection voltage (V
2. If input voltage from external input pin (EXLVI)
3. Input voltage from external input pin (EXLVI) must be EXLVI < V
after the processing in <3>.
when LVIMD is set to 1, an internal reset signal is not generated.
CHAPTER 24 LOW-VOLTAGE DETECTOR
EXLVI
User’s Manual U17504EJ2V0UD
= 1.21 V (TYP.))).
detection voltage (V
Note
).
DD
detection voltage (V
.
EXLVI
= 1.21 V (TYP.))
EXLVI
529
=