EP1S10F484I6 Altera, EP1S10F484I6 Datasheet - Page 769

• Manufacturer Part Number: EP1S10F484I6
• Description: IC STRATIX FPGA 10K LE 484-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S10F484I6

• Number Of Logic Elements/cells: 10570
• Number Of Labs/clbs: 1057
• Total Ram Bits: 920448
• Number Of I /o: 335
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 10570
• # I/os (max): 335
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 10570
• Ram Bits: 920448
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Configuring
Using the
MicroBlaster
Driver
Device
Configuration
Pins
Altera Corporation
July 2005
VCCSEL
PORSEL
Table 11–15. Dedicated Configuration Pins on the Stratix or Stratix GX Device
Pin Name
N/A
N/A
User Mode
The MicroBlaster
devices in an embedded environment using PS or FPP mode. The
MicroBlaster software driver supports a Raw Binary File (.rbf)
programming input file. The source code is developed for the Windows
NT operating system, although you can customize it to run on other
operating systems. For more information on the MicroBlaster software
driver, go to the Altera web site (www.altera.com).
The following tables describe the connections and functionality of all the
configuration related pins on the Stratix or Stratix GX device.
describes the dedicated configuration pins, which are required to be
connected properly on your board for successful configuration. Some of
these pins may not be required for your configuration schemes.
All
All
Configuration
Scheme
TM
Input
Input
software driver allows you to configure Altera
Pin Type
Dedicated input that selects which input buffer
is used on the configuration input pins;
nCONFIG
nCS
The
V
resistor that is always active.
A logic high (1.5-V, 1.8-V, 2.5-V, 3.3-V) selects
the 1.8-V/1.5-V input buffer, and a logic low
selects the 3.3-V/2.5-V input buffer. See the
“V
Dedicated input which selects between a POR
time of 2 ms or 100 ms. A logic high (1.5-V, 1.8-
V, 2.5-V, 3.3-V) selects a POR time of about 2
ms and a logic low selects POR time of about
100 ms.
The
V
resistor that is always active.
C C I N T
C C I N T
CCSEL
Configuring Stratix & Stratix GX Devices
VCCSEL
PORSEL
and
and has an internal 2.5 k pull-down
Pins”
and has an internal 2.5 k pull-down
Stratix Device Handbook, Volume 2
CLKUSR
,
DCLK
input buffer is powered by
input buffer is powered by
section for more details.
,
Description
RUnLU
.
(Part 1 of 8)
,
nCE
,
nWS
Table 11–15
,
nRS
11–51
,
CS
,