EP1S10F484I6 Altera, EP1S10F484I6 Datasheet - Page 821

• Manufacturer Part Number: EP1S10F484I6
• Description: IC STRATIX FPGA 10K LE 484-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S10F484I6

• Number Of Logic Elements/cells: 10570
• Number Of Labs/clbs: 1057
• Total Ram Bits: 920448
• Number Of I /o: 335
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 10570
• # I/os (max): 335
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 10570
• Ram Bits: 920448
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Figure 12–25. Remote System Configuration Using a MAX Device & Flash Memory
Using an
External
Processor
Altera Corporation
September 2004
Remote Source
Configuration Data
Application
incoming data from the remote source and writes it to the address
location in flash memory. The Nios embedded processor initiates loading
of factory configuration into the Stratix or Stratix GX device.
shows remote system configuration using a MAX device and flash
memory combination.
You can use both remote and local configuration modes in this scheme.
You should specify a default page for factory configuration and make
sure it is not altered or removed at any time. In remote system
configuration mode, PS, FPP, and PPA modes are supported when
configuring with MAX and flash devices.
This section describes remote system configuration with Stratix or Stratix
GX devices and the Nios embedded processor, using an external
processor and flash memory devices.
In this scheme, the external processor and flash memory device replace
the enhanced configuration device. Flash memory stores configuration
data, and the processor controls reading and writing to the flash memory
and also keeps track of the address location. This type of remote system
configuration supports PS, FPP, and PPA modes.
The processor determines at which address which length to store the
configuration data in flash memory. The Nios embedded processor
receives the incoming data from a remote source and writes it to the
address location in the flash memory, and then initiates loading of factory
Stratix GX Device
Processor
Stratix or
Watchdog
Nios
Circuitry
Remote System Configuration with Stratix & Stratix GX Devices
Application/Factory
Configuration Data
Configuration Data
Application
Control Signals
Configuration
MAX & Flash Memory
Application Data 1
Application Data 7
Flash Memory
Factory Data
MAX Device
Stratix Device Handbook, Volume 2
Application from
Selecting Next
Factory Data
Figure 12–25
12–43