MT90520AG ZARLINK [Zarlink Semiconductor Inc], MT90520AG Datasheet - Page 51
![no-image](/images/no-image-200.jpg)
MT90520AG
Manufacturer Part Number
MT90520AG
Description
8-Port Primary Rate Circuit Emulation AAL1 SAR
Manufacturer
ZARLINK [Zarlink Semiconductor Inc]
Datasheet
1.MT90520AG.pdf
(180 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
- Current page: 51 of 180
- Download datasheet (2Mb)
MT90520
Data Sheet
mode, the TX UTOPIA Interface complies with the receive sub-section of the multi-PHY section of the ATM Forum
specification.
The TX UTOPIA Interface can be configured to operate in a variety of modes. The TX UTOPIA can operate in PHY
or ATM mode, using Level 1 or Level 2 mode, with a 16-bit or 8-bit interface. The user selects between these
different modes by programming the UTOPIA Configuration Register at byte address 4000h.
When operating in 16-bit mode, the cells transmitted by the interface are 54 bytes long, whereas when operating in
8-bit mode, the cells transmitted by the interface are 53 bytes long. When operating in 8-bit mode, the upper 8 bits
of the outgoing data bus (UTO_OUT_DATA[15:8]) are not used.
When operating in Level 1 mode, the ATM Forum only specifies UTO_OUT_CLK to a maximum clock speed of
25 MHz. The user, however, is able to use the interface at speeds of up to 52 MHz, if desired.
TX UTOPIA FIFO
The main role of the TX UTOPIA FIFO is to act as a buffer between the TX_SAR and the TX UTOPIA Interface.
This buffer is necessary because it is possible for the UTOPIA bus to be halted (i.e., not able to transmit) while the
TX_SAR continues to assemble cells. This is an 8-cell deep FIFO.
TX Parity
The TX Parity sub-module generates an odd parity bit over the outgoing UTOPIA data (UTO_OUT_DATA[7:0] in 8-
bit mode, and UTO_OUT_DATA[15:0] in 16-bit mode). The resulting parity bit (UTO_OUT_PAR) is transmitted to
the external device to which the TX UTOPIA Interface is connected.
4.4.1.2
Reassembly Direction
RX UTOPIA Interface
The primary function of the RX UTOPIA Interface is to receive ATM cells (in accordance with the ATM Forum’s
Level 2 UTOPIA specification), from devices which are external to the MT90520 chip. The interface can operate in
either ATM or PHY mode. When the interface is operating in ATM mode, it complies with the receive portion of the
ATM Forum specification. When the interface operates in PHY mode, it complies with the transmit portion of the
ATM Forum specification. In addition, when operating in PHY mode, the RX UTOPIA Interface complies with the
transmit sub-section of the multi-PHY section of the ATM Forum specification.
In the same manner as the TX UTOPIA Interface, the RX UTOPIA Interface can be configured to operate in a
variety of modes. It can operate in PHY or ATM mode, in Level 1 or Level 2 mode, with a 16-bit or an 8-bit interface.
The user selects between these different modes by programming the UTOPIA Configuration Register (at byte
address 4000h).
When operating in 16-bit mode, the cells received by the interface are 54 bytes long; when operating in 8-bit mode,
the cells being received are 53 bytes long. When operating in 8-bit mode, the upper 8 bits of the incoming data bus
(UTO_IN_DATA[15:8]) are not used.
When operating in Level 1 mode, the ATM Forum only specifies UTO_IN_CLK to a maximum clock speed of
25 MHz. However, the user is able to use the interface at speeds of up to 52 MHz, if desired.
OAM & VPI/VCI Filter
The role of the OAM & VPI/VCI filter sub-module is to limit unnecessary VPI/VCI comparison and look-up table
accesses. The filter allows only certain cells to be written into the Receive UTOPIA FIFO of the MT90520 and
discards unwanted cells. Unwanted cells fall into three categories:
•
null cells (i.e., cells with VPI = 0 and VCI = 0); these cells are automatically discarded.
51
Zarlink Semiconductor Inc.
Related parts for MT90520AG
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![SL1430](/images/manufacturer_photos/0/7/727/zarlink_semiconductor_tmb.jpg)
Part Number:
Description:
Zarlink Semiconductor Inc [TV IF PREAMPLIFIER]
Manufacturer:
Zarlink Semiconductor
Datasheet:
![MT312C](/images/no-image3.png)
Part Number:
Description:
Satellite Channel Decoder
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![MSC60028/IG/DP2S](/images/no-image3.png)
Part Number:
Description:
Power Factor Controller
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![P10C68-](/images/no-image3.png)
Part Number:
Description:
CMOS/SNOS NVSRAM HIGH PERFORMANCE 8 K x 8 NON-VOLATILE STATIC RAM
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2009KG](/images/no-image3.png)
Part Number:
Description:
Dual stage IF amplifier for cable tuners
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2101C](/images/no-image3.png)
Part Number:
Description:
Synthesized Broadband Converter with Programmable Power
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2150KG](/images/no-image3.png)
Part Number:
Description:
Cable Tuner Front End LNA with AGC
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2150LH2S](/images/no-image3.png)
Part Number:
Description:
Front End Power Splitter with AGC
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2524HP](/images/no-image3.png)
Part Number:
Description:
1.3GHz Dual Wideband Logarithmic Amplifier
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL2610IG](/images/no-image3.png)
Part Number:
Description:
Wide Dynamic Range Image Reject MOPLL
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL1451NADP](/images/no-image3.png)
Part Number:
Description:
WIDEBAND PLL FM DETECTOR FOR SATELLITE TV
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL1452NAMP](/images/no-image3.png)
Part Number:
Description:
WIDEBAND LINEAR FM DETECTOR FOR SATELLITE TV
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL161](/images/no-image3.png)
Part Number:
Description:
WIDEBAND LOG IF STRIP AMPLIFIER
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL1613CDP](/images/no-image3.png)
Part Number:
Description:
WIDEBAND LOG IF STRIP AMPLIFIER
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet:
![SL1640](/images/no-image3.png)
Part Number:
Description:
THIS DOCUMENT IS FOR MAINTENANCE PURPOSES ONLY AND IS NOT RECOMMENDED FOR NEW DESIGNS
Manufacturer:
ZARLINK [Zarlink Semiconductor Inc]
Datasheet: