PIC12C672T-10/SM Microchip Technology, PIC12C672T-10/SM Datasheet - Page 187

no-image

PIC12C672T-10/SM

Manufacturer Part Number
PIC12C672T-10/SM
Description
IC MCU OTP 2KX14 A/D 8-SOIJ
Manufacturer
Microchip Technology
Series
PIC® 12Cr
Datasheets

Specifications of PIC12C672T-10/SM

Core Processor
PIC
Core Size
8-Bit
Speed
10MHz
Peripherals
POR, WDT
Number Of I /o
5
Program Memory Size
3.5KB (2K x 14)
Program Memory Type
OTP
Ram Size
128 x 8
Voltage - Supply (vcc/vdd)
3 V ~ 5.5 V
Data Converters
A/D 4x8b
Oscillator Type
Internal
Operating Temperature
0°C ~ 70°C
Package / Case
8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
For Use With
XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOIC309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Connectivity
-
12.6
1997 Microchip Technology Inc.
Timer1 Oscillator
A crystal oscillator circuit is built in between pins T1OSI (input) and T1OSO (amplifier output). It
is enabled by setting the T1OSCEN control bit (T1CON<3>). The oscillator is a low power
oscillator, rated up to 200 kHz operation. It will continue to run during SLEEP. It is primarily
intended for a 32 kHz crystal, which is an ideal frequency for real-time keeping.
the capacitor selection for the Timer1 oscillator.
The Timer1 oscillator is identical to the LP oscillator. The user must provide a software time delay
to ensure proper oscillator start-up.
Table 12-1: Capacitor Selection for the Timer1 Oscillator
Crystals Tested:
32.768 kHz
100 kHz
200 kHz
Note 1: Higher capacitance increases the stability of oscillator but also increases the start-up
Note:
2: Since each resonator/crystal has its own characteristics, the user should consult the
Osc Type
time.
resonator/crystal manufacturer for appropriate values of external components.
LP
This allows the counter to operate (increment) when the device is in sleep mode,
which allows Timer1 to be used as a real-time clock.
Epson C-001R32.768K-A
Epson C-2 100.00 KC-P
STD XTL 200.000 kHz
100 kHz
200 kHz
32 kHz
Freq
Section 12. Timer1
33 pF
15 pF
15 pF
C1
DS31012A-page 12-7
20 PPM
20 PPM
20 PPM
Table 12-1
33 pF
15 pF
15 pF
C2
shows
12

Related parts for PIC12C672T-10/SM