PIC12C672T-10/SM Microchip Technology, PIC12C672T-10/SM Datasheet - Page 34

• Manufacturer Part Number: PIC12C672T-10/SM
• Description: IC MCU OTP 2KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672T-10/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOIC309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

PICmicro MID-RANGE MCU FAMILY
2.3
DS31002A-page 2-4
Crystal Oscillators / Ceramic Resonators
In XT, LP or HS modes a crystal or ceramic resonator is connected to the OSC1 and OSC2 pins
to establish oscillation
cut crystal. Using a series cut crystal may give a frequency out of the crystal manufacturer’s
specifications. When in XT, LP or HS modes, the device can have an external clock source drive
the OSC1 pin
Figure 2-1: Crystal or Ceramic Resonator Operation (HS, XT or LP Oscillator Mode)
Note 1: A series resistor, R
(Figure
2: The feedback resistor, R
3: Depending on the device, the buffer to the internal logic may be
either before or after the oscillator inverter.
C1
C2
2-3).
(Figure
Rs
XTAL
2-1). The PICmicro oscillator design requires the use of a parallel
(1)
OSC1
OSC2
S
, may be required for AT strip cut crystals.
R
F (2)
F
, is typically in the range of 2 to 10 M
PIC16CXXX
To internal logic
SLEEP
To internal logic
1997 Microchip Technology Inc.
(3)
(3)