PIC12C672T-10/SM Microchip Technology, PIC12C672T-10/SM Datasheet - Page 418

• Manufacturer Part Number: PIC12C672T-10/SM
• Description: IC MCU OTP 2KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672T-10/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOIC309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

PICmicro MID-RANGE MCU FAMILY
22.9
22.10
22.11
DS31022A-page 22-16
Effects of a RESET
Connection Considerations
Transfer Function
A device reset forces all registers to their reset state. This forces the A/D module to be turned off,
and any conversion is aborted. The value that is in the ADRES register is not modified for a
Power-on Reset. The ADRES register will contain unknown data after a Power-on Reset.
If the input voltage exceeds the rail values (V
of the conversion is out of specification.
An external RC filter is sometimes added for anti-aliasing of the input signal. The R component
should be selected to ensure that the total source impedance is kept under the 10 k
mended specification. Any external components connected (via hi-impedance) to an analog
input pin (capacitor, zener diode, etc.) should have very little leakage current at the pin.
The ideal transfer function of the A/D converter is as follows: the first transition occurs when the
analog input voltage (V
Figure 22-6:
Note:
Care must be taken when using the RA0 pin in A/D conversions due to its proximity
to the OSC1 pin.
A/D Transfer Function
AIN
) is 1 LSb (or Analog V
FEh
FFh
04h
03h
02h
01h
00h
Analog input voltage
SS
or V
REF
DD
/ 256)
) by greater than 0.2V, then the accuracy
(Figure
1997 Microchip Technology Inc.
22-6).
recom-