PIC12C672T-10/SM Microchip Technology, PIC12C672T-10/SM Datasheet - Page 659

• Manufacturer Part Number: PIC12C672T-10/SM
• Description: IC MCU OTP 2KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672T-10/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOIC309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

Transfer direction of data and acknowledgment bits depends on R/W bits.
Sr
Combined format - A master addresses a slave with a 10-bit address, then transmits
1997 Microchip Technology Inc.
Combined format:
S
(Code + A9:A8)
Slave Address
From slave to master
From master to slave
Slave Address R/W A Data A/A Sr
(write)
(read)
R/W A
data to this slave and reads data from this slave.
When a master does not wish to relinquish the bus (which occurs by generating a STOP condi-
tion), a repeated START condition (Sr) must be generated. This condition is identical to the start
condition (SDA goes high-to-low while SCL is high), but occurs after a data transfer acknowledge
pulse (not the bus-free state). This allows a master to send “commands” to the slave and then
receive the requested information or to address a different slave device. This sequence is shown
in
Figure A-8:
Figure
Slave Address
A = acknowledge (SDA low)
A = not acknowledge (SDA high)
S = Start Condition
P = Stop Condition
(A7:A0)
A-8.
Sr = repeated
Start Condition
(n bytes + acknowledge)
(read or write)
Combined Format
Slave Address R/W A Data A/A
A
Data
A
(write)
Data A/A
Direction of transfer
may change at this point
Sr Slave Address
(Code + A9:A8)
P
(read)
Appendix A
R/W A Data A
DS31034A-page 34-7
Data
A P
34