APA600-CQ208B Actel, APA600-CQ208B Datasheet - Page 5

• Manufacturer Part Number: APA600-CQ208B
• Description: FPGA ProASICPLUS Family 600K Gates 180MHz 0.22um (CMOS) Technology 2.5V 208-Pin CQFP
• Manufacturer: Actel

Specifications of APA600-CQ208B

• Package: 208CQFP
• Family Name: ProASICPLUS
• Device System Gates: 600000
• Number Of Registers: 21504
• Maximum Internal Frequency: 180 MHz
• Typical Operating Supply Voltage: 2.5 V
• Maximum Number Of User I/os: 158
• Ram Bits: 129024
• Re-programmability Support: Yes

Device Family Overview
The ProASIC
generation family of flash FPGAs, offers enhanced
performance over Actel’s ProASIC family. It combines the
advantages of ASICs with the benefits of programmable
devices through nonvolatile flash technology. This
enables engineers to create high-density systems using
existing ASIC or FPGA design flows and tools. In addition,
the ProASIC
circuit based on two on-board phase-locked loops (PLLs).
The family offers up to one million system gates,
supported with up to 198 kbits of two-port SRAM and up
to 712 user I/Os, all providing 50 MHz PCI performance.
Advantages
performance. Unlike SRAM-based FPGAs, four levels of
routing hierarchy simplify routing, while the use of flash
technology allows all functionality to be live at power-
up. No external boot PROM is required to support device
programming. While on-board security mechanisms
prevent
reprogramming can be performed in-system to support
future design iterations and field upgrades. The device’s
architecture mitigates the complexity of ASIC migration
at higher user volume. This makes ProASIC
effective solution for applications in the networking,
communications, computing, and avionics markets.
The ProASIC
reprogrammability through an advanced flash-based
0.22 μm LVCMOS process with four layers of metal.
Standard
implement logic and control functions, including the
PLLs and LVPECL inputs. This results in predictable
performance compatible with gate arrays.
The
comparable to gate arrays. The device core consists of a
Sea-of-Tiles
latch, or three-input/one-output logic function by
programming the appropriate Flash switches. The
ProASIC
access
CMOS
™
PLUS
PLUS
PLUS
. Each tile can be configured as a flip-flop,
PLUS
to
family offers a unique clock conditioning
family achieves its nonvolatility and
family of devices, Actel’s second-
design
to
architecture
the
the
designer
techniques
program
provides
extend
are
information,
PLUS
granularity
used
beyond
a cost-
to
v5.9
combination
resources, and abundant flash switches allows 100%
utilization and over 95% routability for highly congested
designs. Tiles and larger functions are interconnected
through a four-level routing hierarchy.
Embedded two-port SRAM blocks with built-in FIFO/RAM
control logic can have user-defined depths and widths.
Users can also select programming for synchronous or
asynchronous operation, as well as parity generations or
checking.
The unique clock conditioning circuitry in each device
includes two clock conditioning blocks. Each block
provides a PLL core, delay lines, phase shifts (0° and
180°), and clock multipliers/dividers, as well as the
circuitry needed to provide bidirectional access to the
PLL. The PLL block contains four programmable
frequency dividers which allow the incoming clock signal
to be divided by a wide range of factors from 1 to 64.
The clock conditioning circuit also delays or advances the
incoming reference clock up to 8 ns (in increments of
0.25 ns). The PLL can be configured internally or
externally during operation without redesigning or
reprogramming the part. In addition to the PLL, there
are two LVPECL differential input pairs to accommodate
high-speed clock and data inputs.
To support customer needs for more comprehensive,
lower-cost, board-level
devices are fully compatible with IEEE Standard 1149.1
for test access port and boundary-scan test architecture.
For more information concerning the flash FPGA
implementation, please refer to the
(JTAG)" section on page
ProASIC
performance plastic packages. Those packages and the
performance features discussed above are described in
more detail in the following sections.
PLUS
devices are available in a variety of high-
of
fine
2-8.
ProASIC
granularity,
testing, Actel’s
PLUS
Flash Family FPGAs
flexible
"Boundary Scan
ProASIC
routing
PLUS
1-1