LPC2917_19_01 NXP Semiconductors, LPC2917_19_01 Datasheet - Page 37

• Manufacturer Part Number: LPC2917_19_01
• Description: The LPC2917/2919/01 combine an ARM968E-S CPU core with two integrated TCMblocks operating at frequencies of up to 125 MHz, CAN and LIN, 56 kB SRAM, up to768 kB flash memory, external memory interface, two 10-bit ADCs, and multiple serial andparallel
• Manufacturer: NXP Semiconductors

NXP Semiconductors
LPC2917_19_01_3
Product data sheet
The PWMs can be used to generate waveforms in which the frequency, duty cycle and
rising and falling edges can be controlled very precisely. Capture inputs are provided to
measure event phases compared to the main counter. Depending on the applications,
these inputs can be connected to digital sensor motor outputs or digital external signals.
Interrupt signals are generated on several events to closely interact with the CPU.
The ADCs can be used for any application needing accurate digitized data from analog
sources. To support applications like motor control, a mechanism to synchronize several
PWMs and ADCs is available (sync_in and sync_out).
Note that the PWMs run on the PWM clock and the ADCs on the ADC clock, see
Section
6.15.2.
Rev. 03 — 9 December 2009
LPC2917/01; LPC2919/01
ARM9 microcontroller with CAN and LIN
© NXP B.V. 2009. All rights reserved.
37 of 86