DSPIC33EP128MC504-I/ML Microchip Technology, DSPIC33EP128MC504-I/ML Datasheet - Page 137

• Manufacturer Part Number: DSPIC33EP128MC504-I/ML
• Description: Digital Signal Processors & Controllers - DSP, DSC 16B 128KB FL 16KBR 60MHz 44P OpAmps
• Manufacturer: Microchip Technology
• Type: dsPIC33E/PIC24Er

Specifications of DSPIC33EP128MC504-I/ML

• Rohs: yes
• Core: dsPIC33E
• Data Bus Width: 16 bit
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Maximum Clock Frequency: 7.37 MHz, 32 kHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5 x 16-bit, 2 x 32-bit
• Device Million Instructions Per Second: 70 MIPs
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Package / Case: TQFP-44
• Mounting Style: SMD/SMT
• Family / Core: dsPIC33E/PIC24E
• Interface Type: CAN, I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: Yes
• Product: DSPs
• Program Memory Type: Flash
• Supply Current: 10 mA

8.0
FIGURE 8-1:
 2011-2012 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
2: Some registers and associated bits
DIRECT MEMORY ACCESS
(DMA)
of
dsPIC33EPXXXMC20X/50X,
PIC24EPXXXGP/MC20X
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 22. “Direct Mem-
ory Access (DMA)” (DS70348) of the
“dsPIC33E/PIC24E Family Reference
Manual”, which is available from the
Microchip
(www.microchip.com).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
the
DMA CONTROLLER
PERIPHERAL
dsPIC33EPXXXGP50X,
web
families
and
site
of
in
DMA
The DMA controller transfers data between peripheral
data registers and data space SRAM
In addition, DMA can access the entire data memory
space. The Data Memory Bus Arbiter is utilized when
either the CPU or DMA attempt to access SRAM,
resulting in potential DMA or CPU stalls.
The DMA controller supports 4 independent channels.
Each channel can be configured for transfers to or from
selected
supported by the DMA controller include:
• ECAN™
• Analog-to-Digital Converter (ADC)
• Serial Peripheral Interface (SPI)
• UART
• Input Capture
• Output Compare
Refer to
peripherals.
Table 8-1
(see
peripherals.
Data Memory
Figure
SRAM
Arbiter
for a complete list of supported
4-18)
Some
of
DS70657F-page 137
the
peripherals