DSPIC33EP128MC504-I/ML Microchip Technology, DSPIC33EP128MC504-I/ML Datasheet - Page 277

• Manufacturer Part Number: DSPIC33EP128MC504-I/ML
• Description: Digital Signal Processors & Controllers - DSP, DSC 16B 128KB FL 16KBR 60MHz 44P OpAmps
• Manufacturer: Microchip Technology
• Type: dsPIC33E/PIC24Er

Specifications of DSPIC33EP128MC504-I/ML

• Rohs: yes
• Core: dsPIC33E
• Data Bus Width: 16 bit
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Maximum Clock Frequency: 7.37 MHz, 32 kHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5 x 16-bit, 2 x 32-bit
• Device Million Instructions Per Second: 70 MIPs
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Package / Case: TQFP-44
• Mounting Style: SMD/SMT
• Family / Core: dsPIC33E/PIC24E
• Interface Type: CAN, I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: Yes
• Product: DSPs
• Program Memory Type: Flash
• Supply Current: 10 mA

REGISTER 19-1:
 2011-2012 Microchip Technology Inc.
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
When performing Master operations, ensure that the IPMIEN bit is ‘0’.
STREN: SCLx Clock Stretch Enable bit (when operating as I
Used in conjunction with SCLREL bit.
1 = Enable software or receive clock stretching
0 = Disable software or receive clock stretching
ACKDT: Acknowledge Data bit (when operating as I
Value that is transmitted when the software initiates an Acknowledge sequence.
1 = Send NACK during Acknowledge
0 = Send ACK during Acknowledge
ACKEN: Acknowledge Sequence Enable bit
(when operating as I
1 = Initiate Acknowledge sequence on SDAx and SCLx pins and transmit ACKDT data bit.
0 = Acknowledge sequence not in progress
RCEN: Receive Enable bit (when operating as I
1 = Enables Receive mode for I
0 = Receive sequence not in progress
PEN: Stop Condition Enable bit (when operating as I
1 = Initiate Stop condition on SDAx and SCLx pins. Hardware clear at end of master Stop sequence.
0 = Stop condition not in progress
RSEN: Repeated Start Condition Enable bit (when operating as I
1 = Initiate Repeated Start condition on SDAx and SCLx pins. Hardware clear at end of
0 = Repeated Start condition not in progress
SEN: Start Condition Enable bit (when operating as I
1 = Initiate Start condition on SDAx and SCLx pins. Hardware clear at end of master Start sequence.
0 = Start condition not in progress
Hardware clear at end of master Acknowledge sequence.
master Repeated Start sequence.
I2CxCON: I2Cx CONTROL REGISTER (CONTINUED)
2
C master, applicable during master receive)
2
C. Hardware clear at end of eighth bit of master receive data byte.
2
C master)
2
2
2
C master, applicable during master receive)
C master)
C master)
2
C slave)
2
C master)
DS70657F-page 277