DSPIC33EP128MC504-I/ML Microchip Technology, DSPIC33EP128MC504-I/ML Datasheet - Page 213

• Manufacturer Part Number: DSPIC33EP128MC504-I/ML
• Description: Digital Signal Processors & Controllers - DSP, DSC 16B 128KB FL 16KBR 60MHz 44P OpAmps
• Manufacturer: Microchip Technology
• Type: dsPIC33E/PIC24Er

Specifications of DSPIC33EP128MC504-I/ML

• Rohs: yes
• Core: dsPIC33E
• Data Bus Width: 16 bit
• Program Memory Size: 128 KB
• Data Ram Size: 16 KB
• Maximum Clock Frequency: 7.37 MHz, 32 kHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5 x 16-bit, 2 x 32-bit
• Device Million Instructions Per Second: 70 MIPs
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Package / Case: TQFP-44
• Mounting Style: SMD/SMT
• Family / Core: dsPIC33E/PIC24E
• Interface Type: CAN, I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: Yes
• Product: DSPs
• Program Memory Type: Flash
• Supply Current: 10 mA

14.0
FIGURE 14-1:
 2011-2012 Microchip Technology Inc.
Trigger and
Sync Sources
Note 1:
Note 1: This data sheet summarizes the features
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X, AND PIC24EPXXXGP/MC20X
IC Clock
Sources
ICx Pin
2: Some registers and associated bits
INPUT CAPTURE
of
dsPIC33EPXXXMC20X/50X,
PIC24EPXXXGP/MC20X
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 12. “Input Cap-
ture” (DS70352) of the “dsPIC33E/
PIC24E
which is available from the Microchip web
site (www.microchip.com).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
The Trigger/Sync source is enabled by default and is set to Timer3 as a source. This timer must be enabled for
proper ICx module operation or the Trigger/Sync source must be changed to another source option.
ICTSEL<2:0>
the
Trigger and
Sync Logic
Prescaler
INPUT CAPTURE MODULE BLOCK DIAGRAM
Counter
1:1/4/16
Family Reference Manual”,
Select
Clock
dsPIC33EPXXXGP50X,
Increment
Reset
ICM<2:0>
SYNCSEL<4:0>
Trigger
families
Clock Synchronizer
Edge Detect Logic
(1)
ICxTMR
and
and
of
in
The Input Capture module is useful in applications
requiring frequency (period) and pulse measurement.
The dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/
50X, and PIC24EPXXXGP/MC20X devices support up
to four input capture channels.
Key features of the Input Capture module include:
• Hardware-configurable for 32-bit operation in all
• Synchronous and Trigger modes of output
• A 4-level FIFO buffer for capturing and holding
• Configurable interrupt generation
• Up to six clock sources available for each module,
16
modes by cascading two adjacent modules
compare operation, with up to 31 user-selectable
trigger/sync sources available
timer values for several events
driving a separate internal 16-bit counter
4-Level FIFO Buffer
ICOV, ICBNE
Event and
ICI<1:0>
Interrupt
ICxBUF
Logic
CTMU Edge-control
Logic
PTG Trigger
Input
Set ICxIF
DS70657F-page 213
16
System Bus
16