R5F21324ANSP#U1 Renesas Electronics America, R5F21324ANSP#U1 Datasheet - Page 407

• Manufacturer Part Number: R5F21324ANSP#U1
• Description: MCU 1KB FLASH 16K ROM 20-LSSOP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/32Ar

Specifications of R5F21324ANSP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 15
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 20-LSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Under development
R8C/32A Group
REJ09B0458-0020 Rev.0.20
Page 377 of 583
Figure 24.6
Note:
1. Write 0 after reading 1 to set the TEND bit to 0.
(1)
(2)
(3)
SSSR register
SSER register
Preliminary specification
Specifications in this manual are tentative and subject to change.
Sample Flowchart of Data Transmission (Clock Synchronous Communication Mode)
Write transmit data to SSTDR register
Read TDRE bit in SSSR register
Read TEND bit in SSSR register
transmission
Initialization
TDRE = 1 ?
TEND = 1 ?
continues?
Nov 05, 2008
Start
Data
End
TEND bit ← 0
TE bit ← 0
Yes
No
Yes
No
Yes
(1)
No
24. Synchronous Serial Communication Unit (SSU)
(2) Determine whether data transmission continues.
(3) When data transmission is completed, the TEND
(1) After reading the SSSR register and confirming
that the TDRE bit is set to 1, write the transmit
data to the SSTDR register. When the transmit
data is written to the SSTDR register, the TDRE
bit is automatically set to 0.
bit is set to 1. Set the TEND bit to 0 and the TE bit
to 0 and complete transmit mode.