PIC18F-LF1XK50 MICROCHIP [Microchip Technology], PIC18F-LF1XK50 Datasheet - Page 20

• Manufacturer Part Number: PIC18F-LF1XK50
• Description: 20-Pin USB Flash Microcontrollers
• Manufacturer: MICROCHIP [Microchip Technology]

PIC18F/LF1XK50
2.6
The Oscillator Control (OSCCON)
Oscillator Control 2 (OSCCON2)
control the system clock and frequency selection
options.
REGISTER 2-1:
DS41350E-page 20
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-4
bit 3
bit 2
bit 1-0
Note 1:
IDLEN
R/W-0
2:
3:
Oscillator Control
Reset state depends on state of the IESO Configuration bit.
Source selected by the INTSRC bit of the OSCTUNE register, see text.
Default output frequency of HFINTOSC on Reset.
IDLEN: Idle Enable bit
1 = Device enters Idle mode on SLEEP instruction
0 = Device enters Sleep mode on SLEEP instruction
IRCF<2:0>: Internal Oscillator Frequency Select bits
111 = 16 MHz
110 = 8 MHz
101 = 4 MHz
100 = 2 MHz
011 = 1 MHz
010 = 500 kHz
001 = 250 kHz
000 = 31 kHz
OSTS: Oscillator Start-up Time-out Status bit
1 = Device is running from the clock defined by FOSC<2:0> of the CONFIG1 register
0 = Device is running from the internal oscillator (HFINTOSC or LFINTOSC)
HFIOFS: HFINTOSC Frequency Stable bit
1 = HFINTOSC frequency is stable
0 = HFINTOSC frequency is not stable
SCS<1:0>: System Clock Select bits
1x = Internal oscillator block
01 = Secondary (Timer1) oscillator
00 = Primary clock (determined by CONFIG1H[FOSC<3:0>]).
IRCF2
R/W-0
OSCCON: OSCILLATOR CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
(3)
(2)
(Register
(Register
IRCF1
R/W-1
2-2) registers
2-1) and the
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
IRCF0
R/W-1
Preliminary
(1)
OSTS
R-q
(1)
HFIOFS
R-0
 2010 Microchip Technology Inc.
q = depends on condition
x = Bit is unknown
R/W-0
SCS1
R/W-0
SCS0
bit 0