LPC2925FBD100,551 NXP Semiconductors, LPC2925FBD100,551 Datasheet - Page 22

• Manufacturer Part Number: LPC2925FBD100,551
• Description: IC ARM9 MCU FLASH 512KB 100-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC2900r

Specifications of LPC2925FBD100,551

• Core Processor: ARM9
• Core Size: 32-Bit
• Speed: 125MHz
• Connectivity: CAN, I²C, LIN, SPI, UART/USART, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 16K x 8
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 1.71 V ~ 3.6 V
• Data Converters: A/D 16x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Processor Series: LPC29
• Core: ARM968E-S
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935287116551

NXP Semiconductors
LPC2921_23_25_3
Product data sheet
6.11.1 General subsystem clock description
6.11.2 Chip and feature identification
6.11.3 System Control Unit (SCU)
6.11.4 Event router
6.11 General subsystem
The general subsystem is clocked by CLK_SYS_GESS, see
The Chip/Feature ID (CFID) module contains registers which show and control the
functionality of the chip. It contains an ID to identify the silicon and also registers
containing information about the features enabled or disabled on the chip.
The key features are:
The CFID has no external pins.
The system control unit contains system-related functions.The key feature is configuration
of the I/O port-pins multiplexer. It defines the function of each I/O pin of the
LPC2921/2923/2925. The I/O pin configuration should be consistent with peripheral
function usage.
The SCU has no external pins.
The event router provides bus-controlled routing of input events to the vectored interrupt
controller for use as interrupt or wake-up signals.
Key features:
The event router allows the event source to be defined, its polarity and activation type to
be selected and the interrupt to be masked or enabled. The event router can be used to
start a clock on an external event.
The vectored interrupt-controller inputs are active HIGH.
•
•
•
•
•
•
•
•
•
Identification of product
Identification of features enabled
Up to 16 level-sensitive external interrupt pins, including the receive pins of SPI, CAN,
LIN, and UART, as well as the I
Input events can be used as interrupt source either directly or latched
(edge-detected).
Direct events disappear when the event becomes inactive.
Latched events remain active until they are explicitly cleared.
Programmable input level and edge polarity.
Event detection maskable.
Event detection is fully asynchronous, so no clock is required.
All information provided in this document is subject to legal disclaimers.
Rev. 03 — 14 April 2010
2
C-bus SCL pins plus three internal event sources.
ARM9 microcontroller with CAN, LIN, and USB
LPC2921/2923/2925
Section
6.7.2.
© NXP B.V. 2010. All rights reserved.
22 of 84