HD6417712BPV Renesas Electronics America, HD6417712BPV Datasheet - Page 730

• Manufacturer Part Number: HD6417712BPV
• Description: MPU 1.5/3.3V 0K PB-FREE 256-BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH Ethernetr

Specifications of HD6417712BPV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, Ethernet, FIFO, SCI, SIO
• Peripherals: DMA, POR, WDT
• Number Of I /o: 24
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Section 18 Ethernet Controller (EtherC)
18.3.40 CAM Entry Table POST1 Register (TSU_POST1)
When using the CAM, the conditions for referring to each CAM entry table can be specified by
using the TSU_POST1 to TSU_POST4 registers. TSU_POST1 specifies the conditions for
referring to TSU_ADRH0 to TSU_ADRH7 and TSU_ADRL0 to TSU_ADRL7. The settings of
this register are valid when the POSENU bit in TSU_FWSLC is set to 1.
Rev. 1.00 Dec. 27, 2005 Page 686 of 932
REJ09B0269-0100
Bit
0
Bit
31 to 28 POST03 to
27 to 24 POST13 to
Bit Name
TEN31
Bit Name
POST00
POST10
Initial
Value
0
Initial
Value
All 0
All 0
R/W
R/W
R/W
R/W
R/W
Description
CAM Entry Table 31 (TSU_ADRH31 and TSU_ADRL31)
Setting
0: Disabled
1: Enabled
Description
These bits set the conditions for referring to the
CAM entry table 0. By setting multiple bits to 1,
multiple conditions can be selected.
POST03: The CAM entry table 0 is referred in port 0
POST02: The CAM entry table 0 is referred in port 0
POST01: The CAM entry table 0 is referred in port 1
POST00: The CAM entry table 0 is referred in port 1
These bits set the conditions for referring to the
CAM entry table 1. By setting multiple bits to 1,
multiple conditions can be selected.
POST13: The CAM entry table 1 is referred in port 0
POST12: The CAM entry table 1 is referred in port 0
POST11: The CAM entry table 1 is referred in port 1
POST10: The CAM entry table 1 is referred in port 1
reception.
to 1 relay.
reception.
to 0 relay.
reception.
to 1 relay.
reception.
to 0 relay.