UPD78F0138HGK-9ET-A Renesas Electronics America, UPD78F0138HGK-9ET-A Datasheet - Page 33

• Manufacturer Part Number: UPD78F0138HGK-9ET-A
• Description: MCU 8BIT 60K FLASH 64TQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx1+r

Specifications of UPD78F0138HGK-9ET-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: 3-Wire SIO, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 42
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

<R>
<R>
<R>
Notes 1.
Timers
Clock output
Buzzer output
A/D converter
Serial interface
Multiplier/divider
Vectored interrupt
sources
Key interrupt
Reset
ROM correction
On-chip debug function
Supply voltage
Operating ambient temperature
Package
2.
3.
4.
Timer outputs
Select either of the functions of these alternate-function pins.
Use the product in a voltage range of 2.2 to 5.5 V because the detection voltage (V
clear (POC) circuit is 2.1 V 0.1 V.
Use the product in a voltage range of 2.25 to 5.5 V because the detection voltage (V
clear (POC) circuit is 2.0 to 2.25 V.
PD78F0138HD only
Item
Internal
External
• 16-bit timer/event counter: 2 channels (1 channel only in the PD78F0132H)
• 8-bit timer/event counter:
• 8-bit timer:
• Watch timer
• Watchdog timer:
5 (PWM
output: 4)
• 78.125 kHz, 156.25 kHz, 312.5 kHz, 625 kHz, 1.25 MHz, 2.5 MHz, 5 MHz, 10 MHz
• 32.768 kHz (subsystem clock: @32.768 kHz operation)
1.22 kHz, 2.44 kHz, 4.88 kHz, 9.77 kHz (high-speed system clock: @10 MHz operation)
10-bit resolution
• UART mode supporting LIN-bus:
• 3-wire serial I/O mode:
• 3-wire serial I/O mode/UART mode
• 16 bits
• 32 bits
16
9
Key interrupt (INTKR) occurs by detecting falling edge of key input pins (KR0 to KR7).
• Reset using RESET pin
• Internal reset by watchdog timer
• Internal reset by clock monitor
• Internal reset by power-on-clear
• Internal reset by low-voltage detector
• Standard products and (A) grade products:
• (A1) grade products:
• Standard products and (A) grade products : T
• (A1) grade products :
• 64-pin plastic LQFP (10
• 64-pin plastic LQFP (14
• 64-pin plastic TQFP (12
• 64-pin plastic LQFP (12
PD78F0132H
V
V
(high-speed system clock: @10 MHz operation)
DD
DD
= 2.5 to 5.5 V (with internal oscillation clock or subsystem clock: V
= 2.7 to 5.5 V (with internal oscillation clock: V
16 bits = 32 bits (multiplication)
16 bits = 32 bits remainder of 16 bits (division)
User’s Manual U16899EJ3V0UD
6 (PWM output: 4)
19
CHAPTER 1 OUTLINE
PD78F0133H
8 channels
10)
14)
12)
12)
2 channels
2 channels
1 channel
1 channel
Note 4
PD78F0134H
Note 1
: 1 channel
1 channel
1 channel (none in the PD78F0132H)
T
A
A
Provided
= 40 to +110 C
PD78F0136H PD78F0138H PD78F0138HD
= 40 to +85 C
DD
= 2.0 to 5.5 V
Note 3
POC
DD
POC
)
= 2.0 to 5.5 V
) of the power-on-
) of the power-on-
Provided
Note 2
(2/2)
)
31