UPD78F0138HGK-9ET-A Renesas Electronics America, UPD78F0138HGK-9ET-A Datasheet - Page 467

• Manufacturer Part Number: UPD78F0138HGK-9ET-A
• Description: MCU 8BIT 60K FLASH 64TQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0/Kx1+r

Specifications of UPD78F0138HGK-9ET-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: 3-Wire SIO, LIN, UART/USART
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 42
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

code, refer to the separate document 78K/0 Series Instructions User’s Manual (U12326E).
28.1 Conventions Used in Operation List
28.1.1 Operand identifiers and specification methods
the instruction operand identifier (refer to the assembler specifications for details). When there are two or more
methods, select one of them. Upper case letters and the symbols #, !, $ and [ ] are keywords and must be written as
they are. Each symbol has the following meaning.
write the #, !, $, and [ ] symbols.
parentheses in the table below, R0, R1, R2, etc.) can be used for specification.
r
rp
sfr
sfrp
saddr
saddrp
addr16
addr11
addr5
word
byte
bit
RBn
This chapter lists each instruction set of the 78K0/KE1+ in table form. For details of each operation and operation
Operands are written in the “Operand” column of each instruction in accordance with the specification method of
In the case of immediate data, describe an appropriate numeric value or a label. When using a label, be sure to
For operand register identifiers r and rp, either function names (X, A, C, etc.) or absolute names (names in
Note Addresses from FFD0H to FFDFH cannot be accessed with these operands.
Remark For special function register symbols, refer to Table 3-6 Special Function Register List.
#: Immediate data specification
!:
$: Relative address specification
[ ]: Indirect address specification
Identifier
Absolute address specification
X (R0), A (R1), C (R2), B (R3), E (R4), D (R5), L (R6), H (R7),
AX (RP0), BC (RP1), DE (RP2), HL (RP3)
Special function register symbol
Special function register symbol (16-bit manipulatable register even addresses only)
FE20H to FF1FH Immediate data or labels
FE20H to FF1FH Immediate data or labels (even address only)
0000H to FFFFH Immediate data or labels
(Only even addresses for 16-bit data transfer instructions)
0800H to 0FFFH Immediate data or labels
0040H to 007FH Immediate data or labels (even address only)
16-bit immediate data or label
8-bit immediate data or label
3-bit immediate data or label
RB0 to RB3
Table 28-1. Operand Identifiers and Specification Methods
CHAPTER 28 INSTRUCTION SET
User’s Manual U16899EJ3V0UD
Note
Specification Method
Note
465