TMPM362F10FG Toshiba, TMPM362F10FG Datasheet - Page 413

• Manufacturer Part Number: TMPM362F10FG
• Description: 32BIT MICROCONTROLLER
• Manufacturer: Toshiba
• Series: TX03r

Specifications of TMPM362F10FG

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: I²C, Microwire, SIO, SPI, SSP, UART/USART
• Peripherals: DMA, WDT
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Package / Case: 144-LQFP
• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 144
• Package: LQFP(20x20)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 5
• Uart/sio (ch): 12
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 16
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Number Of I /o: -
• Eeprom Size: -
• Oscillator Type: -
• Lead Free Status / Rohs Status: Details
• Other names: Q5704184A

12.7.2
12.7.2.1
12.7.2.2
cuits in which clocks can be selected by the settings of the baud rates generator and modes.
The serial clock circuit is a block to generate transmit and receive clocks (SIOCLK) and consists of the cir-
rate.
Serial Clock Generation Circuit
(1)
(2)
(1)
The baud rate generator generates transmit and receive clocks to determine the serial channel transfer
A clock can be selected by setting the modes and the register.
Modes can be specified by setting the SCxMOD0<SM>.
The input clock in I/O interface mode is selected by setting SCxCR.
The clock in UART mode is selected by setting SCxMOD0<SC>.
Baud Rate Generator
Clock Selection Circuit
32 and 128.
and SCxBRADD.
mode, either 1/N or N + (16-K)/16 in the UART mode.
The input clock of the baud rate generator is selected from the prescaler outputs divided by 2, 8,
This input clock is selected by setting the SCxBRCR<BRCK>.
The frequency division ratio of the output clock in the baud rate generator is set by SCxBRCR
The following frequency divide ratios can be used; 1/N frequency division in the I/O interface
The table below shows the frequency division ratio which can be selected.
Table 12-7 shows clock selection in I/O interface mode.
Note:1/N (N=1)frequency division ratio can be used only when a double buffer is enabled.
Buad Rate Generator input clock
Baud Rate Generator output clock
Transfer Clock in I/O interface mode
I/O interface
UART
Mode
Divide Function Setting
SCxBRCR<BRADDE>
N + (16-K)/16 division
Divide by N
Divide by N
Page 389
SCxBRCR<BRS>
1 to 16 (Note)
Divide by N
1 to 16
2 to 15
SCxBRADD<BRK>
Divide by K
1 to 15
TMPM362F10FG
-
-