LFXP2-5E-5QN208C Lattice, LFXP2-5E-5QN208C Datasheet - Page 37

• Manufacturer Part Number: LFXP2-5E-5QN208C
• Description: FPGA - Field Programmable Gate Array 5K LUTs 146I/O Inst- on DSP 1.2V -5 Spd
• Manufacturer: Lattice

Specifications of LFXP2-5E-5QN208C

• Number Of Macrocells: 5000
• Maximum Operating Frequency: 200 MHz
• Number Of Programmable I/os: 146
• Data Ram Size: 10 KB
• Supply Voltage (max): 1.14 V
• Supply Current: 17 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Supply Voltage (min): 1.26 V
• Package / Case: PQFP-208
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Lattice Semiconductor
DQSXFER
LatticeXP2 devices provide a DQSXFER signal to the output buffer to assist it in data transfer to DDR memories
that require DQS strobe be shifted 90
DQSXFER signal runs the span of the data bus.
sysIO Buffer
Each I/O is associated with a flexible buffer referred to as a sysIO buffer. These buffers are arranged around the
periphery of the device in groups referred to as banks. The sysIO buffers allow users to implement the wide variety
of standards that are found in today’s systems including LVCMOS, SSTL, HSTL, LVDS and LVPECL.
sysIO Buffer Banks
LatticeXP2 devices have eight sysIO buffer banks for user I/Os arranged two per side. Each bank is capable of sup-
porting multiple I/O standards. Each sysIO bank has its own I/O supply voltage (V
voltage references, V
shows the eight banks and their associated supplies.
In LatticeXP2 devices, single-ended output buffers and ratioed input buffers (LVTTL, LVCMOS and PCI) are pow-
ered using V
pendent of V
Each bank can support up to two separate V
enced input buffers. Some dedicated I/O pins in a bank can be configured to be a reference voltage supply pin.
Each I/O is individually configurable based on the bank’s supply and reference voltages.
Figure 2-32. LatticeXP2 Banks
CCIO
CCIO
. LVTTL, LVCMOS33, LVCMOS25 and LVCMOS12 can also be set as fixed threshold inputs inde-
.
REF1
V
V REF1(7)
V REF2(7)
V CCIO6
V REF1(6)
V REF2(6)
CCIO7
GND
GND
and V
REF2
, that allow it to be completely independent from the others. Figure 2-32
o
. This shifted DQS strobe is generated by the DQSDEL block. The
REF
Bank 0
Bank 5
voltages, V
BOTTOM
2-34
TOP
REF1
Bank 1
Bank 4
and V
REF2
LatticeXP2 Family Data Sheet
, that set the threshold for the refer-
CCIO
V CCIO2
V REF1(2)
V REF2(2)
V CCIO3
V REF1(3)
V REF2(3)
GND
GND
). In addition, each bank has
Architecture