20-668-0003 Rabbit Semiconductor, 20-668-0003 Datasheet - Page 15

• Manufacturer Part Number: 20-668-0003
• Description: IC CPU RABBIT2000 30MHZ 100PQFP
• Manufacturer: Rabbit Semiconductor

Specifications of 20-668-0003

• Processor Type: Rabbit 2000 8-Bit
• Speed: 30MHz
• Voltage: 2.7V, 3V, 3.3V, 5V
• Mounting Type: Surface Mount
• Package / Case: 100-MQFP, 100-PQFP
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 30 MHz
• Operating Supply Voltage: 0 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 40
• Number Of Timers: 8 & 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 20-668-0003; 316-1062

Table 2-1 provides estimates of the operating power for selected clock speeds.
2.2.3 Time/Date Oscillator
The 32.768 kHz oscillator drives an external 32.768 kHz quartz crystal. The 32.768 kHz
clock is used to drive a battery-backable (there is a separate power pin) internal 48-bit
counter that serves as a real-time clock (RTC). The counter can be set and read by soft-
ware and is intended for keeping the date and time. There are enough bits to keep the date
for more than 100 years. The 32.768 kHz oscillator is also used to drive the watchdog
timer and to generate the baud clock for serial port A during the cold boot sequence.
2.2.4 Parallel I/O
There are 40 parallel input/output lines divided among five 8-bit ports designated A
through E. Most of the port lines have alternate functions, such as serial data or chip select
strobes. Parallel ports D and E have the capability of timer-synchronized outputs. The out-
put registers are cascaded.
Stores to the port are loaded in the first-level register. That register in turn is transferred to
the output register on a selected timer signal. The timer signal can also cause an interrupt
that can be used to set up the next bit to be output on the next timer pulse. This feature can
be used to generate precisely controlled pulses whose edges are positioned with high accu-
racy in time. Applications include communications signaling, pulse width modulation and
driving stepper motors.
Chapter 2 Rabbit Design Features
Clock Speed
(MHz)
25.0
12.5
12.5
6.0
Table 2-1. Operating Power Estimates at Selected Clock Speeds
Figure 2-1. Cascaded Output Registers for Parallel Ports D and E
Voltage
(V)
5.0
5.0
3.3
3.3
Load Data
Load Clock
Current
(mA)
80
40
26
13
Timer Clock
Power
(mW)
400
200
87
42
Clock Speed
(MHz)
0.032
6.0
3.0
1.5
Port Output
Voltage
(V)
2.5
2.5
2.5
2.5
Current
(mA)
0.054
2.5
10
5
Power
(mW)
0.135
25
12
6
9