TMPR4937XBG-300 Toshiba, TMPR4937XBG-300 Datasheet - Page 451

no-image

TMPR4937XBG-300

Manufacturer Part Number
TMPR4937XBG-300
Description
Manufacturer
Toshiba
Datasheet

Specifications of TMPR4937XBG-300

Family Name
TX49
Device Core Size
64b
Frequency (max)
300MHz
Instruction Set Architecture
RISC
Supply Voltage 1 (typ)
1.5V
Operating Supply Voltage (max)
1.6V
Operating Supply Voltage (min)
1.4V
Operating Temp Range
0C to 70C
Operating Temperature Classification
Commercial
Mounting
Surface Mount
Pin Count
484
Package Type
BGA
Lead Free Status / Rohs Status
Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
TMPR4937XBG-300
Manufacturer:
TOSHIBA
Quantity:
16 845
Part Number:
TMPR4937XBG-300
Manufacturer:
DSP
Quantity:
81
15.3.2
15.3.3
software interrupts, but these interrupts are directly reported to the TX49/H3 core independently of this
Interrupt Controller. Please refer to the “64-bit TX System RISC TX49/H2, TX49/H3, TX49/H4 Core
Architecture” for more information.
Interrupt request detection
IDE bit of the Interrupt Detection Enable Register (IRDEN) is set to “1.” All interrupts detected by the
Interrupt Controller are masked when this bit is cleared.
(IRDM0) and Interrupt Detection Mode Register 1 (IRDM1). There are four detection modes: Low
level, High level, falling edge, and rising edge.
Interrupt level assigning
(IRLVL0-7). Interrupt level 7 is the highest priority and interrupt level1 is the lowest priority. Level 0
interrupts will be masked. (Table 15.3.2).
for each interrupt source indicated in Table 15.3.1.
In addition to the above, the TX49/H3 core has a TX49/H3 core internal timer interrupt and two
In order to perform interrupt detection, each register of the Interrupt Controller is initialized, then the
It is possible to set each interrupt factor detection mode using Interrupt Detection Mode Register 0
The detected interrupt factors can be read out from the Interrupt Pending Register (IRPND).
Interrupt levels from 0 to 7 are assigned to each detected interrupt using the Interrupt Level Register
The priorities set by these interrupt levels will be given higher priority than the priorities provided
Priority
Table 15.3.2 Interrupt Levels
Mask
High
Low
15-5
Interrupt Level
(IRLVLn.ILm)
111
110
101
100
011
010
001
000
Chapter 15 Interrupt Controller

Related parts for TMPR4937XBG-300