MC68HC08AZ60ACFU MOTOROLA [Motorola, Inc], MC68HC08AZ60ACFU Datasheet - Page 83

• Manufacturer Part Number: MC68HC08AZ60ACFU
• Description: Microcontrollers
• Manufacturer: MOTOROLA [Motorola, Inc]

6.5.3 EEPROM-2 Program/Erase Protection
MC68HC08AZ60A — Rev 0.0
MOTOROLA
NOTE:
As the CGMXCLK or bus clock is user selected, the EEPROM-2
Timebase Divider Register must be configured with the appropriate
value to obtain the 35 s. The timebase divider value is calculated by
using the following formula:
This value is written to the EEPROM-2 Timebase Divider Register
(EE2DIVH and EE2DIVL) or programmed into the EEPROM-2
Timebase Divider Non-Volatile Register prior to any EEPROM-2
program or erase operations(see EEPROM-2 Configuration on page
82 and
The EEPROM-2 has a special feature that designates the 16 bytes of
addresses from $06F0 to $06FF to be permanently secured. This
program/erase protect option is enabled by programming the EEPRTCT
bit in the EEPROM-2 Non-Volatile Register (EE2NVR) to a logic zero.
Once the EEPRTCT bit is programmed to 0 for the first time:
Once armed, the protect option is permanently enabled. As a
consequence, all functions in the EE2NVR will remain in the state they
were in immediately before the security was enabled.
EE2DIV= INT[Reference Frequency(Hz) x 35 x10
•
•
•
•
•
Programming and erasing of secured locations $06F0 to $06FF is
permanently disabled.
Secured locations $06F0 to $06FF can be read as normal.
Programming and erasing of EE2NVR is permanently disabled.
Bulk and Block Erase operations are disabled for the unprotected
locations $0600-$06EF, $0700-$07FF.
Single byte program and erase operations are still available for
locations $0600-$06EF and $0700-$07FF for all bytes that are not
protected by the EEPROM-2 Block Protect EEBPx bits (see
EEPROM-2 Block Protection
Configuration Register
EEPROM-2 Timebase Requirements
EEPROM-2
on page 91).
on page 84 and
on page 82).
-6
Functional Description
EEPROM-2 Array
Advance Information
+0.5]
EEPROM-2
83