MC68332GCEH20 Freescale Semiconductor, MC68332GCEH20 Datasheet - Page 95

• Manufacturer Part Number: MC68332GCEH20
• Description: IC MCU 32BIT 20MHZ 132-PQFP
• Manufacturer: Freescale Semiconductor
• Series: M683xxr

Specifications of MC68332GCEH20

• Core Processor: CPU32
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Type: ROMless
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 132-QFP
• Controller Family/series: 68K
• No. Of I/o's: 15
• Ram Memory Size: 2KB
• Cpu Speed: 20MHz
• No. Of Timers: 1
• Embedded Interface Type: QSPI, SCI, UART
• Digital Ic Case Style: PQFP
• Rohs Compliant: Yes
• Data Bus Width: 32 bit
• Data Ram Size: 2 KB
• Interface Type: QSPI, SCI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 16
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

4.8.1.4 PORTC Data Register
4.8.2 Chip-Select Operation
4.8.3 Using Chip-Select Signals for Interrupt Acknowledge
MC68332
USER’S MANUAL
to %00 (CPU space), interrupt priority (ADDR[3:1]) is compared to IPL value. If the val-
ues are the same, and other option register constraints are satisfied, a chip select sig-
nal is asserted. This field only affects the response of chip selects and does not affect
interrupt recognition by the CPU. Encoding %000 causes a chip-select signal to be as-
serted regardless of interrupt acknowledge cycle priority, provided all other constraints
are met.
The AVEC bit selects one of two methods of acquiring an interrupt vector during an
external interrupt acknowledge cycle. The internal autovector signal is generated only
in response to interrupt requests from the SIM IRQ pins.
The PORTC data register latches data for PORTC pins programmed as discrete out-
puts. When a pin is assigned as a discrete output, the value in this register appears at
the output. PC[6:0] correspond to CS[9:3]. Bit 7 is not used. Writing to this bit has no
effect, and it always reads zero.
When the MCU makes an access, enabled chip-select circuits compare the following
items:
When a match occurs, the chip-select signal is asserted. Assertion occurs at the same
time as AS or DS assertion in asynchronous mode. Assertion is synchronized with
ECLK in synchronous mode. In asynchronous mode, the value of the DSACK field de-
termines whether DSACK is generated internally.DSACK also determines the number
of wait states inserted before internal DSACK assertion.
The speed of an external device determines whether internal wait states are needed.
Normally, wait states are inserted into the bus cycle during S3 until a peripheral as-
serts DSACK. If a peripheral does not generate DSACK, internal DSACK generation
must be selected and a predetermined number of wait states can be programmed into
the chip-select option register.
Refer to the SIM Reference Manual (SIMRM/AD) for further information.
Ordinary I/O bus cycles use supervisor space access, but interrupt acknowledge bus
cycles use CPU space access. Refer to 4.5.4 CPU Space Cycles and 4.7 Interrupts
for more information. There are no differences in flow for chip selects in each type of
space, but base and option registers must be properly programmed for each type of
external bus cycle.
1. Function codes to SPACE fields, and to the IPL field if the SPACE field encod-
2. Appropriate ADDR bits to base address fields.
3. Read/write status to R/W fields.
4. ADDR0 and/or SIZ bits to the BYTE field (16-bit ports only).
5. Priority of the interrupt being acknowledged (ADDR[3:1]) to IPL fields (when the
ing is not for CPU32 space.
access is an interrupt acknowledge cycle).
Freescale Semiconductor, Inc.
For More Information On This Product,
SYSTEM INTEGRATION MODULE
Go to: www.freescale.com
4-55