PIC16LF723A-I/ML Microchip Technology, PIC16LF723A-I/ML Datasheet - Page 47

• Manufacturer Part Number: PIC16LF723A-I/ML
• Description: MCU PIC 3.5K FLASH XLP 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF723A-I/ML

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 25
• Program Memory Type: FLASH
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC16LF
• No. Of I/o's: 25
• Ram Memory Size: 192Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

6.0
There are as many as thirty-five general purpose I/O
pins available. Depending on which peripherals are
enabled, some or all of the pins may not be available as
general purpose I/O. In general, when a peripheral is
enabled, the associated pin may not be used as a
general purpose I/O pin.
6.1
The Alternate Pin Function Control (APFCON) register
is used to steer specific peripheral input and output
functions between different pins. The APFCON register
is shown in Register 6-1. For this device family, the
following functions can be moved between different
pins:
• SS (Slave Select)
• CCP2
REGISTER 6-1:
 2010 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-2
bit 1
bit 0
U-0
—
I/O PORTS
Alternate Pin Function
Unimplemented: Read as ‘0’.
SSSEL: SS Input Pin Selection bit
0 = SS function is on RA5/AN4/CPS7/SS/V
1 = SS function is on RA0/AN0/SS/V
CCP2SEL: CCP2 Input/Output Pin Selection bit
0 = CCP2 function is on RC1/T1OSI/CCP2
1 = CCP2 function is on RB3/CCP2
U-0
—
APFCON: ALTERNATE PIN FUNCTION CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
U-0
—
U-0
—
CAP
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
CAP
PIC16F/LF722A/723A
U-0
—
U-0
—
x = Bit is unknown
SSSEL
R/W-0
DS41417A-page 47
CCP2SEL
R/W-0
bit 0