PIC16LF723A-I/ML Microchip Technology, PIC16LF723A-I/ML Datasheet - Page 77

• Manufacturer Part Number: PIC16LF723A-I/ML
• Description: MCU PIC 3.5K FLASH XLP 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF723A-I/ML

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 25
• Program Memory Type: FLASH
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC16LF
• No. Of I/o's: 25
• Ram Memory Size: 192Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

7.0
7.1
The oscillator module has a wide variety of clock sources
and selection features that allow it to be used in a wide
range of applications while maximizing performance and
minimizing power consumption. Figure 7-1 illustrates a
block diagram of the oscillator module.
Clock sources can be configured from external
oscillators, quartz crystal resonators, ceramic resonators
and Resistor-Capacitor (RC) circuits. In addition, the
system can be configured to use an internal calibrated
high-frequency oscillator as clock source, with a choice
of selectable speeds via software.
FIGURE 7-1:
 2010 Microchip Technology Inc.
Internal Oscillator
OSC2
OSC1
500 kHz
OSCILLATOR MODULE
Overview
External Oscillator
SIMPLIFIED PIC
PLL
32x
(Configuration Word 1)
PLLEN
1
0
Sleep
®
MCU CLOCK SOURCE BLOCK DIAGRAM
16 MHz/500 kHz
2 MHz/62.5 kHz
8 MHz/250 kHz
4 MHz/125 kHz
(OSCCON Register)
IRCF<1:0>
11
10
01
00
PIC16F/LF722A/723A
Clock source modes are configured by the FOSC bits
in Configuration Word 1 (CONFIG1). The oscillator
module can be configured for one of eight modes of
operation.
1.
2.
3.
4.
5.
6.
7.
8.
RC – External Resistor-Capacitor (RC) with
F
RCIO – External Resistor-Capacitor (RC) with
I/O on OSC2/CLKOUT.
INTOSC – Internal oscillator with F
on OSC2 and I/O on OSC1/CLKIN.
INTOSCIO – Internal oscillator with I/O on
OSC1/CLKIN and OSC2/CLKOUT.
EC – External clock with I/O on OSC2/CLKOUT.
HS – High Gain Crystal or Ceramic Resonator
mode.
XT – Medium Gain Crystal or Ceramic
Resonator Oscillator mode.
LP – Low-Power Crystal mode.
OSC
/4 output on OSC2/CLKOUT.
LP, XT, HS, RC, EC
INTOSC
(Configuration Word 1)
FOSC<2:0>
(CPU and Peripherals)
System Clock
DS41417A-page 77
OSC
/4 output