ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 119

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

/***************** Polling Mode Transmission ****************************/
/********** BUFFER TRANSMISSION ****************************/
/******** POLLING MODE *************************************/
Error_Status=I2Cs_IsReceptionCompleted();
while((!Time_Out()) && (Error_Status != I2Cs_ADDRESS_DETECTED))
/* Time_out() is bring before to remove side-efffect error */
{
}
Comm_Mode=I2Cs_GetCommMode();
while(Comm_Mode == I2Cs_DEFAULT)
{
}
if(Comm_Mode == I2Cs_TX_MODE)
{
Error_Status=I2Cs_IsReceptionCompleted();
Comm_Mode=I2Cs_GetCommMode();
/* SINGLE BYTE TRANSMISSION */
I2Cs_PutByte(single_byte);
Error_Status=I2Cs_IsTransmitCompleted();
while((!(Time_Out())) && (Error_Status != I2Cs_TX_DATA_OK))
{
}
switch( Error_Status)
{
}
#ifdef I2C_POLLING_TX
Error_Status = I2Cs_PutBuffer(Buff_Out,maxsize);
switch(Error_Status)
{
Error_Status=I2Cs_IsTransmitCompleted();
case I2Cs_TX_AF:
case I2Cs_BERR:
case I2Cs_DEFAULT_STATUS:
case I2Cs_STOP_DETECTED:
case I2Cs_GENERAL_CALL:
case I2Cs_ADDRESS_DETECTED:
default:
case I2Cs_TX_DATA_OK:
case I2Cs_OVERFLOW_TX:
case I2Cs_BERR:
case I2Cs_ADDRESS_DETECTED:
case I2Cs_GENERAL_CALL:
default:
User_Function();
break;
User_Function();
break;
break;
User_Function();
break;
User_Function();
/* checking for communication mode */
Function Descriptions
/* transmitter mode */
119/235