ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 231

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

9.2.1.4 Status Information Service
Table 179. CanGetStatus
9.2.1.5 Transmit/Receive Task Services
Table 180. CanTx_ISR
Table 181. CanRx_ISR
Function Name
Function Name
Function Name
Function Prototype
Function Prototype
Input Parameters
Output Parameters
Behaviour Description
Function Prototype
Input Parameters
Output Parameters
Behaviour Description
Input Parameters
Output Parameters
Behaviour Description
CanGetStatus
CanTx_ISR
CanRx_ISR
canuint8 CanGetStatus (void)
None
KCANHWISSLEEP - CAN controller is in sleep
mode
KCANHWISBUSOFF - CAN controller entered
BusOff state
KCANHWISPASSIVE - Error Passive limit has
been reached
KCANHWISWARNING - Error Warning limit has
been reached
This service returns the current status of the CAN
controller.
void CanTx_ISR (void)
None
None
This service handles the wakeup, error and trans-
mit mailbox empty interrupts. Wakeup and Error
interrupt flags are cleared for wakeup and error
interrupts. In the event of transmit interrupt, the
confirmation flag is set for the message transmit-
ted.
(Note- confirmation is raised for the messages re-
quested by service CanTransmit( )).
void CanRx_ISR (void)
None
None
This service handles the receive FIFO interrupt.
Received message(CAN-ID, CAN-DATA) is cop-
ied into the Rx buffer corresponding to the mes-
sage received. Rx buffer, into which data is
copied, is identified by the filter match index. The
Indication flag is set for the message received.
Function Descriptions
231/235