ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 164

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
Table 111. PWMART_ICAP_Mode
164/235
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
ARR value
0
0 -127
128 -191
192 - 223
224 - 239
frequency and resolution (0x00 to 0xFFh)
Resolution
8-bit
> 7-bit
> 6-bit
> 5-bit
> 4-bit
PWMART_ICAP_Mode
Void PWMART_ICAP_Mode(Pwmart_Icap
ICAP_I,Pwmart_Sens_IT_Param SENS_IT_Value)
Selects the user defined transition on ARTICx pin. This
function can be called twice to make use of both ARTICx
pins. You can pass one or more parameters from input pa-
rameter 2 by Bitwise ORing them together.
PWMART_ICAP_1
Input Capture at ARTIC1 pin is enabled
PWMART_ICAP_2
Input Capture at ARTIC2 pin is enabled
PWMART_SENSITIVITY_F
Falling edge triggers the capture
PWMART_SENSITIVITY_R
Rising edge triggers the capture
PWMART_ICAP1_IT_ENABLE
Enable input capture1 interrupt
PWMART_ICAP2_IT_ENABLE
Enable input capture2 interrupt
None
1. Function PWMART_Counter_Enable must have been
called.
2. The input capture pins used must be configured as float-
ing inputs.
None
1. PWMART configured for input capture mode.
2. To detect the occurrence of valid edge, you can poll the
input capture flag using the function
PWMART_Status_Flag. In this case, you should not ena-
ble the input capture interrupt.
PWMART_Status_Flag,
PWMART_ICAP_Getvalue
f
0.244-31.25 KHz
0.244-62.5 KHz
0.488-125 KHz
0.977-250 KHz
1.953-500 KHz
PWM