ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 146

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
Table 95. TIMER8_Mode_Disable
146/235
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
TIMER8_Mode_Disable
Void TIMER8_Mode_Disable(Timer8_Mode MODE_M)
Disables the timer8 mode depending upon the Input pa-
rameter passed. This function should be called more than
once in order to disable more than one mode.
TIMER8_MODE_M
where M can be 1, 2, 3, 4, 5, 6, 7, 8, 9.
M=1, Output compare1 mode (OCMP1 )
M=2, Output compare2 mode (OCMP2 )
M=3, Input capture1 mode (ICAP1 )
M=4, Input capture2 mode (ICAP2)
M=5, Pulse width modulation mode (PWM).
M=6, One pulse modulation mode (OPM)
M=7, Forced compare1 mode (FORCDCMP1)
M=8, Forced compare2 mode (FORCDCMP2)
M=9, Timer prescalar, counter and outputs disabled
None
Timer8 active in any of the modes.
None
Selected timer8 mode is disabled and the Corresponding
status flag is cleared.
None