ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 218

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
Example
The following C program shows the uses of the EEPROM functions for the Lite0 device.
Program Description:
This program writes 5 data bytes in EEPROM memory from one user buffer, Temp1. Then
data bytes are read from the same EEPROM memory and stored in another buffer, Temp2.
The written data and data read from the two buffers are then compared.
/*============================================================*/
/* Program Start */
#include "ST7lib_Config.h"
#ifdef _HIWARE_
unsigned char ptr_address @ 0x1000;
#endif
#ifdef _COSMIC_
@near unsigned char ptr_address @ 0x1000;
#endif
void main(void);
void main (void)
{
}
/*Program Stop */
/*============================================================*/
218/235
int i;
unsigned char NoofBytes = 5;
unsigned char Temp1[5] = {0x55,0xAA,0x7F,0x18,0x4C};
unsigned char Temp2[5] = {0x00,0x00,0x00,0x00,0x00};
/*@far unsigned char * ptr_write;
@far unsigned char * ptr_read;
ptr_read = &ptr_address;
ptr_write = &ptr_address;*/
EEPROM_Init ();
EEPROM_Write (Temp1,NoofBytes,&ptr_address);
/* Data written from buffer Temp1 to EEPROM memory address 1000h */
/* EEPROM_Write (Temp1,5,(unsigned char * far )0x1000); */
while (EEPROM_Programming () != EEPROM_PROG_COMPLETE);
EEPROM_Read (Temp2,NoofBytes,&ptr_address);
for (i = 0; i<5;i++)
{
}
is called in this way for hiware compiler, when small memory model is used */
/* Waiting till all data bytes programmed from latch to EEPROM cells */
/* Reads data from EEPROM address 1000h and stores it in buffer Temp2 */
/* EEPROM_Read (Temp2,5,(unsigned char * far) 0x1000); */
is called in this way for hiware compiler, when small memory model is used */
if ((*(Temp1+i)) != (*(Temp2+i)))
{
}
while (1);
/* All EEPROM registers initialised to reset value */
/* Mismatch between written data and data read */
/* Comparison of written data and data read */
/* File for user to select device as lite0 */
/* Write function
/* Read function