ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 197

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Notes:
– This function is for ST72F521,ST72F561,ST72F65,ST72F62,ST72F264, ST72325 and
Input Parameter 1
Input Parameter 2
Output Parameter
Required Preconditions
Functions called
Postconditions
See also
ST7232A devices.
1) IT_LEVEL_0 can not be written.
2) These Interrupts do not have an Exit from HALT mode capability.
1)
IT_AVD
Sets the software priority of Auxiliary Voltage detector in-
terrupt
IT_I2C
Sets the software priority of I2C peripheral interrupt
IT_PWMART
Sets the software priority of PWMART peripheral interrupt
IT_DTC
Sets the software priority of DTC peripheral interrupt
IT_PLG
Sets the software priority of Power Management USB
plug/unplug interrupt
IT_ESUSP
Sets the software priority of USB Endsuspend interrupt
IT_USB
Sets the software priority of USB peripheral interrupt
IT_TIM
Sets the software priority of TIMER interrupt
IT_ADC
Sets the software priority of A/D End of Conversion Inter-
rupt
IT_CSS
Sets the software priority of Clock Filter Interrupt
IT_SCI1,IT_SCI2
Sets the software priority of SCI interrupts
IT_LEVEL_1
Sets the priority of the selected interrupt as Level1
IT_LEVEL_2
Sets the priority of the selected interrupt as Level2
IT_LEVEL_3
Sets the priority of the selected interrupt as Level3
None
None
None
None
None
2)
2)
2)
Function Descriptions
197/235