ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 87

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 49. I2C_PutString
Note: The above function is only for I2C Polling mode.
Caution: The application can lose control if the I2C is disabled while using this function.
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
* This is applicable only in multimaster I2C.
I2C_PutString
I2C_TxErrCode_t I2C_PutString (const unsigned char
*PtrToString)
Transmits data string in I2C Polling mode from the user
defined area. Data transmission will stop if any error oc-
curs during transmission. The transmission status will be
returned.
*PtrToString
Start address of the user string.
I2C_TX_AF
If Acknowledge failure has occurred.
I2C_TX_ARLO*
If Arbitration lost is detected.
I2C_TX_BERR*
If misplaced start or stop condition detected.
I2C_DATA_TX_OK
If there is no error in transmission.
1. I2C_Load_Address must have been called (If I2C is
configured in master transmitter mode).
2. You must define I2C Polling mode in ST7lib_config.h.
None
None
I2C_PutString (I2C Interrupt driven mode)
Function Descriptions
87/235