ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 181

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 126. LART_ActivateBREAK
Note: This function is available only for ST7FLite1, ST7FLite2, ST7FLite3 and ST7DALI de-
Table 127. LART_DeactivateBREAK
Note: This function is available only for ST7FLite1, ST7FLite2, ST7FLite3 and ST7DALI de-
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
vices.
vices.
LART_ActivateBREAK
Void LART_ActivateBREAK()
Generates the software BREAK condition. Break pattern
is loaded on PWMx pins.
None
None
Break state PWM pattern is loaded using function
LART_ConfigureBREAK.
None
LART_DeactivateBREAK must have been called to deac-
tivate the BREAK condition.
LART_ConfigureBREAK
LART_DeactivateBREAK
LART_DeactivateBREAK
Deactivates the the software BREAK condition. All LART
registers are initialized to reset state.
None
None
Software BREAK is generated using
LART_ActivateBREAK function
None
All registers are initialized to Reset state. So Init and other
function required to configure the required LART function-
ality must be called again.
LART_ConfigureBREAK
LART_ActivateBREAK
Void LART_DeactivateBREAK()
Function Descriptions
181/235