ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 34

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
9.1.2 SCI
This Library supports 2 SCI of ST72F561 device and 1 SCI on all other devices.
For devices with only one SCI no suffix “x” is used in the function names.
For 2nd SCI of ST72F561 you must replace suffix “x” in the function names with 2.
34/235
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameter
Required Preconditions
SCIx_Init
Void SCIx_Init (SCI_Type_Param1 Init_Value1,
SCI_Type_Param2 Init_Value2)
Initialization of SCI, sets by default receiver sleep off, no break
character will be transmitted, wakeup from sleep by idle frame
detection, Parity disabled, 8-bit transmission mode and Receiver
in active mode. You can select the parity, 9-bit transmission
mode, Receiver wakeup, Receiver Mute and Break Enable fea-
ture through properly selecting the Init_Value1 and Init_Value2.
SCI_ODPARITY_SELECT
Select odd Parity
SCI_EVPARITY_SELECT
Select even parity
SCI_WAKEUP_ADDR
Receiver wake up from mute mode while address mark is detect-
ed(i.e MSBit of the data transmitted should be 1)
SCI_WORDLENGTH_9
Select 9-bit transmission
SCI_DEFAULT_PARAM1
Load the register with the default value(0x00)
SCI_MUTE_ENABLE
Receiver in mute mode
SCI_BREAK_ENABLE
Transmit break characters
SCI_DEFAULT_PARAM2
Load the register with the default value(0x00)
None
SCI port pin should be configured properly.