ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 24

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

How to use the library
4. TX_MSGx_STDID - The standard id part for the MSGx to be transmitted, where x = transmit
message number.
5. TX_MSGx_EXTID - The extended id part for the MSGx to be transmitted, where x =
transmit message number.
6. TX_MSGx_DLC - The length for the MSGx to be transmitted, where x = transmit message
number. The maximum length that can be defined is 8.
7. RX_MSGx_DLC - The length for the MSGx to be received, where x = receive message
number. The maximum length that can be defined is 8.
8. REG_INITx_VALUE - The register initialization value for the CAN controller register, where
REG - register name, x = init structure number.
The following are the parameters that must be configured in the file user.c -
1. MSGx_Tx_Buffer - This declares the buffer for the MSGx to be transmitted. The length of
the buffer is the same as defined by the parameter TX_MSGx_DLC in the file user.h. The
number of such buffers to be declared is the same as defined by the parameter
NO_OF_TX_HANDLES in the file user.h.
2. tx_stdid[ ] - This table stores the standard id value/s for the message/s to be transmitted.
The length of the table is the same as defined by the parameter NO_OF_TX_HANDLES and
the value/s stored inside is/are the same as defined by the parameter TX_MSGx_STDID in
the file user.h. If the message to be transmitted is Extended then above has to logical-ORed
with the EXT_ID_MASK(IDE bit), EXID17 & EXID16 bit values. As a result, the values stored
inside the table are in the same format as of MIDR0 & MIDR1 registers.
3. tx_extid[ ] - This table stores the extended id value/s for the message/s to be transmitted.
The length of the table is the same as defined by the parameter NO_OF_TX_HANDLES and
the value/s stored inside the table is/are the same as defined by the parameter
TX_MSGx_EXTID in the file user.h. It stores the values into the same format as of MIDR2 &
MIDR3 registers.
4. tx_dlc[ ] - This table stores the length for the message/s to be transmitted. The length of the
table is the same as defined by the parameter NO_OF_TX_HANDLES and the value/s stored
inside the table is/are the same as defined by the parameter TX_MSGx_DLC in the file user.h.
5. tx_data_ptr[ ] - This pointer table stores the address of transmit buffer/s (MSGx_Tx_buffer).
The length of the table is the same as defined by the parameter NO_OF_TX_HANDLES in the
file user.h.
6. MSGx_Rx_Buffer - This declares the buffer for the MSGx to be received. The length of the
buffer is the same as defined by the parameter RX_MSGx_DLC in the file user.h. Number of
such buffers to be declared is the same as defined by the parameter NO_OF_RX_HANDLES
in the file user.h.
24/235