ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 209

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 157. MCC_SlowMode
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
1) This parameter is applicable for ST72F521, ST72325 and ST7232A devices, when slow
2) This parameter is applicable for ST7FLite0 device, when slow mode is enabled.
mode is enabled.
MCC_SlowMode
Void MCC_SlowMode (MCC_Mode Slow_Mode,
MCC_Param Config_Value)
Selects f
MCC_SLOW_ENABLE
Enables slow mode.
MCC_SLOW_DISABLE
Disables slow mode.
Selects clock as f
slow mode is disabled.
MCC_CLK_2
Selects clock as f
MCC_CLK_4
Selects clock as f
MCC_CLK_8
Selects clock as f
MCC_CLK_16
Selects clock as f
MCC_CLK_32
Selects clock as f
None
MCC_Init must have been called.
None
None
None
MCC_CLK_0
CPU
main clock frequency depending on the input.
1)
1)
1)
1)
2)
OSC2
OSC2
OSC2
OSC2
OSC2
OSC
/32.
. This parameter is passed when
/2.
/4.
/8.
/16.
Function Descriptions
209/235