ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 69

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 38. SPI_GetBuffer
Note: The above function is only for SPI Polling mode.
Caution: The application can lose control if the SPI is disabled while using this function in poll-
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameters
Required Preconditions
Functions called
See also
ing mode.
SPI_GetBuffer
SPI_RxErrCode_t SPI_GetBuffer (unsigned char *PtrTo-
Buffer, unsigned char NbOfBytes)
Receives a number of data bytes in SPI Polling mode and
stores them in a user defined area. The data reception will
stop if any error occurs during reception. The reception
status will be returned.
*PtrToBuffer
Start address of the user buffer.
NbOfBytes
Number of bytes to be received.
SPI_RX_MODF
If master mode fault occurs.
SPI_RX_OVR
If overrun condition occurs.
SPI_RECEIVE_OK
If there is no error in reception.
1. The SPI should be configured correctly.
2. You must define SPI Polling mode in ST7lib_config.h.
None
SPI_GetBuffer (SPI Interrupt driven mode)
Function Descriptions
69/235