ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 95

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 57. I2C_IsReceptionCompleted
Notes:
– The above function is for I2C Polling or I2C Interrupt driven mode.
– In I2C Polling mode, this function is used in conjunction with I2C_GetByte only.
– If this function is called before any reception request is made, it will check for a single byte
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
reception, and will return I2C_RX_DATA_EMPTY, until the first data byte is received, and
1) This is applicable only in multimaster I2C devices.
2) These Parameters are returned in I2C Interrupt driven mode only.
3) This Parameter is returned in case of single byte reception only, for both I2C Polling and I2C
Interrupt driven modes
I2C_IsReceptionCompleted
I2C_RxErrCode_t I2C_IsReceptionCompleted (void)
For reception of a set of data in I2C Interrupt driven
mode, the function checks for the completion of the recep-
tion or the occurrence of the error and returns the recep-
tion status.
For reception of single byte of data in both I2C Polling and
I2C Interrupt driven modes, it checks if a data byte is re-
ceived and ready for processing. It returns
I2C_RX_DATA_EMPTY until the data byte is received
and returns the reception status when reception is com-
plete.
None
I2C_RX_ARLO
If Arbitration lost is detected.
I2C_RX_BERR
If misplaced start or stop condition is detected.
I2C_RX_AF
If Acknowledge failure has occurred.
I2C_DATA_RX_OK
If the data reception is completed without any error.
I2C_RX_BUFFER_ONGOING
User buffer is not full.
I2C_RX_DATA_EMPTY
If no data byte is received.
None
None
1.For single byte reception, if the byte is received, then
I2C_GetByte can be called after this function.
2. I2C_Error_Clear can be called to clear the error and sta-
tus flags, if required.
None
1)
1)
3)
2)
Function Descriptions
95/235