ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 133

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 85. TIMERx_Mode_Disable
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
1) Function not available in ST72F65.
TIMERx_Mode_Disable
Void TIMERx_Mode_Disable(Timer_Mode MODE_M)
Disables the timer mode depending upon Input parameter
passed. This function should be called more than once to
disable more than one mode.
TIMER_MODE_M
where M can be 1, 2, 3, 4, 5, 6, 7, 8, 9.
M=1, Output compare1 mode (OCMP1 )
M=2, Output compare 2 mode (OCMP2 )
M=3, Input capture 1 mode (ICAP1 )
M=4, Input capture 2 mode (ICAP2)
M=5, Pulse width modulation mode (PWM)
M=6, One pulse modulation mode (OPM)
M=7, Forced compare1 mode (FORCDCMP1)
M=8, Forced compare2 mode (FORCDCMP2)
M=9, timer prescalar, counter and outputs disabled
None
Selected timer mode is disabled and the Corresponding
status flag is cleared.
None
Timer active in any of the modes.
None
Function Descriptions
1)
1)
1)
1)
133/235