ST7FLITE35F2M6 STMicroelectronics, ST7FLITE35F2M6 Datasheet - Page 182

• Manufacturer Part Number: ST7FLITE35F2M6
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE35F2M6

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5085 - EVAL BOARD UNIV MOTOR CONTROL497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Function Descriptions
Table 128. LART_Counter2Init
Note: This function is available only for the ST7FLite3 device.
Table 129. LART_ReloadATR
182/235
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
LART_Counter2Init
Void LART_Counter2Init( Lart_CTR2InitParams InitPar-
ams, unsigned int ATR2Value);
This function enables counter 2 which is used for PWM2,
PWM3 and loads the autoreload register for counter 2.
This also enables counter 2 overflow interrupt depending
upon the input parameters passed.
InitParams:
LART_CTR2_OVF_IT_ENABLE
Enables counter 2 overflow interrupt
LART_CTR2_OVF_IT_DISABLE
Disables counter 2 overflow interrupt
ATR2Value:
Value to be loaded in Autoreload register 2 which is used
for counter 2.
None
None
None
LART_Disable
LART_ReloadATR
Void LART_ReloadATR(unsigned int AutoReloadVal)
This function reloads the autoreload counter. This is used
for generating overflow condition and to customize the API
usage
AutoReloadVal:
12-Bit value for auto reload register.
None
None
None
Auto reload register is loaded with AutoReloadVal
LART_ConfigurePWM
Counter 2 is configured for PWM2 and PWM3