R5F21257SNFP#U0 Renesas Electronics America, R5F21257SNFP#U0 Datasheet - Page 198

• Manufacturer Part Number: R5F21257SNFP#U0
• Description: IC R8C/25 MCU FLASH 52LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/25r

Specifications of R5F21257SNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Size: 48KB (48K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• For Use With: R0K521256S000BE - KIT EVAL STARTER FOR R8C/25
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/24 Group, R8C/25 Group
Rev.3.00
REJ09B0244-0300
Figure 14.30
14.3.3
• Bits IOA2 to IOA0 in the TRDIORA0 register are set to 100b.
• Bits CMD1 to CMD0 in the TRDFCR register are set to 00b.
The above applies under the following conditions:
• The SYNC bit in the TRDMR register is set to 1 (synchronous operation).
• Bits CCLR2 to CCLR0 in the TRDCR0 register are set to 001b (set the TRD0 register to 0000h in input capture).
The TRD1 register is synchronized with the TRD0 register.
The PWM 3 bit in the TRDFCR register is set to 1.
Bits CCLR2 to CCLR0 in the TRDCR1 register are set to 011b (set the TRD1 register to 0000h synchronizing with
the TRD0 register).
• Synchronous preset
• Synchronous clear
Feb 29, 2008
TRDIOA0 input
When the SYNC bit in the TRDMR register is set to 1 (synchronous operation), the data is written to both
the TRD0 and TRD1 registers after writing to the TRDi register.
When the SYNC bit in the TRDMR register is set to 1 and bits CCLR2 to CCLR0 in the TRDCRi register
are set to 011b (synchronous clear), the TRD0 register is set to 0000h at the same time as the TRD1 register
is set to 0000h.
Also, when the SYNC bit in the TRDMR register is set to 1 and bits CCLR2 to CCLR0 in the TRDCRi
register are set to 011b (synchronous clear), the TRD1 register is set to 0000h at the same time as the TRD0
register is set to 0000h.
TRD0 register
TRD1 register
Synchronous Operation
Value in
Value in
Synchronous Operation
n
n
Page 179 of 485
n writing
n is set
n is set
Set to 0000h with TRD0 register
Set to 0000h by input capture
(Input capture at the rising edge of the TRDIOA0 input)
14. Timers