R5F21257SNFP#U0 Renesas Electronics America, R5F21257SNFP#U0 Datasheet - Page 341

• Manufacturer Part Number: R5F21257SNFP#U0
• Description: IC R8C/25 MCU FLASH 52LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/25r

Specifications of R5F21257SNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, Voltage Detect, WDT
• Number Of I /o: 41
• Program Memory Size: 48KB (48K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 52-LQFP
• For Use With: R0K521256S000BE - KIT EVAL STARTER FOR R8C/25
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/24 Group, R8C/25 Group
Rev.3.00
REJ09B0244-0300
Figure 16.14
NOTE:
1. Write 0 after reading 1 to set the TEND bit to 0.
(1)
(2)
(3)
Feb 29, 2008
SSSR register
SSER register
Sample Flowchart of Data Transmission (Clock Synchronous Communication Mode)
Write transmit data to SSTDR register
Read TDRE bit in SSSR register
Read TEND bit in SSSR register
Page 322 of 485
transmission
Initialization
TDRE = 1 ?
TEND = 1 ?
continues?
Start
Data
End
TEND bit ← 0
TE bit ← 0
Yes
No
Yes
No
(1)
Yes
No
(2) Determine whether data transmission continues.
(3) When data transmission is completed, the TEND
(1) After reading the SSSR register and confirming
that the TDRE bit is set to 1, write the transmit
data to the SSTDR register. When the transmit
data is written to the SSTDR register, the TDRE
bit is automatically set to 0.
bit is set to 1. Set the TEND bit to 0 and the TE bit
to 0 and complete transmit mode.
16. Clock Synchronous Serial Interface