M38039FFHFP#U0 Renesas Electronics America, M38039FFHFP#U0 Datasheet - Page 74

• Manufacturer Part Number: M38039FFHFP#U0
• Description: IC 740 MCU FLASH 60K 64QFP
• Manufacturer: Renesas Electronics America
• Series: 740/38000r

Specifications of M38039FFHFP#U0

• Core Processor: 740
• Core Size: 8-Bit
• Speed: 16.8MHz
• Connectivity: SIO, UART/USART
• Peripherals: PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

3803 Group (Spec.H)
Rev.3.11
REJ03B0017-0311
<Notes on CPU Rewrite Mode>
Take the notes described below when rewriting the flash memory
in CPU rewrite mode.
(1) Operation speed
During CPU rewrite mode, set the system clock φ to 4.0 MHz or
less using the clock division ratio selection bits (bits 6 and 7 of
address 003B
(2) Instructions inhibited against use
The instructions which refer to the internal data of the flash
memory cannot be used during CPU rewrite mode.
(3) Interrupts
The interrupts cannot be used during CPU rewrite mode because
they refer to the internal data of the flash memory.
(4) Watchdog timer
If the watchdog timer has been already activated, internal reset
due to an underflow will not occur because the watchdog timer is
surely cleared during program or erase.
(5) Reset
Reset is always valid. The MCU is activated using the boot mode
at release of reset in the condition of CNV
program will begin at the address which is stored in addresses
FFFC
16
and FFFD
16
Apr 5, 2006
).
16
of the boot ROM area.
Page 72 of 113
SS
= “H”, so that the