UPD78F9212CS-CAB-A Renesas Electronics America, UPD78F9212CS-CAB-A Datasheet - Page 157

• Manufacturer Part Number: UPD78F9212CS-CAB-A
• Description: MCU 8BIT 4KB FLASH 16PIN
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9212CS-CAB-A

• Core Processor: 78K0S
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

8.4.3
low-speed internal oscillation clock is being used.
(1) When the watchdog timer operation clock is the system clock (f
Watchdog timer
CPU operation
The watchdog timer stops counting during STOP instruction execution regardless of whether the system clock or
When STOP instruction is executed, operation of the watchdog timer is stopped. After STOP mode is released,
operation stops for 34
stabilization time select register (OSTS) after operation stops in the case of crystal/ceramic oscillation) and then
counting is started again using the operation clock before the operation was stopped. At this time, the counter is
not cleared to 0 but holds its value.
Note The operation stop time is 17 s (MIN.), 34 s (TYP.), and 67 s (MAX.).
Watchdog timer operation in STOP mode (when “low-speed internal oscillator can be stopped by
software” is selected by option byte)
Figure 8-6. Operation in STOP Mode (WDT Operation Clock: Clock to Peripheral Hardware)
f
CPU
Watchdog timer
CPU operation
operation
Normal
Operating
<2> CPU clock: High-speed internal oscillation clock or external clock input
f
CPU
s (TYP.) (after waiting for the oscillation stabilization time set by the oscillation
operation
Oscillation stopped
STOP
<1> CPU clock: Crystal/ceramic oscillation clock
Operating
Normal
CHAPTER 8 WATCHDOG TIMER
stopped
Operation stopped
Operation
User’s Manual U16994EJ6V0UD
Oscillation stopped
Operation stopped
STOP
Note
Oscillation stabilization time
Oscillation stabilization time
(set by OSTS register)
stopped
Operation
Note
X
) when the STOP instruction is executed
Normal operation
Operating
Normal operation
Operating
155