UPD78F9212CS-CAB-A Renesas Electronics America, UPD78F9212CS-CAB-A Datasheet - Page 186

• Manufacturer Part Number: UPD78F9212CS-CAB-A
• Description: MCU 8BIT 4KB FLASH 16PIN
• Manufacturer: Renesas Electronics America
• Series: 78K0S/Kx1+r

Specifications of UPD78F9212CS-CAB-A

• Core Processor: 78K0S
• Core Size: 8-Bit
• Speed: 10MHz
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 13
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

starts after the next instruction is executed.
set at the second clock of NOP (2-clock instruction). In this case, the MOV A, r instruction after the NOP instruction is
executed, and then the interrupt acknowledgment processing is performed.
10.4.2 Multiple interrupt servicing
being serviced, the interrupt mask function must be used to mask interrupts for which a low priority is to be set.
184
Figure 10-8. Interrupt Request Acknowledgment Timing (When Interrupt Request Flag Is Set at Last
If an interrupt request flag (
Figure 10-8 shows an example of the interrupt request acknowledgment timing for an interrupt request flag that is
Caution Interrupt requests will be held pending while the interrupt request flag register 0 (IF0) or
In order to perform multiple interrupt servicing in which another interrupt is acknowledged while an interrupt is
Interrupt
Clock
CPU
interrupt mask flag register 0 (MK0) are being accessed.
Clock During Instruction Execution)
NOP
IF) is set at the last clock of the instruction, the interrupt acknowledgment processing
CHAPTER 10 INTERRUPT FUNCTIONS
User’s Manual U16994EJ6V0UD
MOV A, r
Saving PSW and PC, jump
to interrupt servicing
8 clocks
servicing
Interrupt
program