DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 163

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Remote I/O Terminals with Transistors
Dimensions: DRT2-MD16TA and DRT2-MD16TA-1
5-5-16 Mounting in Control Panels
Using DIN Track
Connecting End Plates
142
Mounting holes
REMOTE TERMINAL DC24V
DRT2-MD16TA
Two, 4.2 dia. or M4
MS
NS
Note The circuit section can be removed by loosening the circuit removal screws.
(Refer to Components of the DRT2-MD16TA and DRT2-MD16TA-1.)
Always turn OFF the communications, internal, and I/O power supplies before
removing or attaching the circuit section.
A Remote I/O Terminal (Basic Unit or Expansion Unit) can be mounted in a
control panel using either of the following methods.
Mount the back of the Remote I/O Terminal to a 35-mm DIN Track. To mount
the Terminal, pull down on the mounting hook on the back of the Terminal with
a screwdriver, latch the DIN Track onto the back of the Terminal, and then
secure the Terminal to the DIN Track. Secure all Slaves on both ends of the
DIN Track with End Plates.
Hook the bottom of the End Plate onto the DIN Track, as shown at (1) in the
following diagram, then hook the top of the End Plate as shown at (2).
170±0.2
180
IN
OUT
Values in parentheses are
reference values.
(83)
58
Section 5-5