DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 164

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Mounting Direction
5-5-17 Wiring the I/O Power Supply and I/O Lines
Wiring the I/O Power
Supply
Remote I/O Terminals with Transistors
Note Always attach an End Plate to both ends of Slaves connected to the DIN
Track.
Unless specific restrictions are given for the Slave, it can be mounted in any of
the following six directions.
The I/O power supplies and I/O lines are all wired to M3 screw terminals.
Connect M3 crimp terminals to the cables and then connect them to the Ter-
minal Block.
Tighten the screws to a torque of 0.5 N·m.
Refer to the wiring details for Slave for information on the terminal arrange-
ment at the terminal block.
Connect an I/O power supply to the Expansion Unit if required. (Refer to 5-5-2
Increasing I/O Using an Expansion Unit.)
6.0 mm max.
6.0 mm max.
End Plate
2
1
Section 5-5
143