DRT2-ID32BV-1 Omron, DRT2-ID32BV-1 Datasheet - Page 225

• Manufacturer Part Number: DRT2-ID32BV-1
• Description: 32 In Vert MIL Connector PNP
• Manufacturer: Omron

Specifications of DRT2-ID32BV-1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Screw-less Clamp Terminals
Wiring to a Clamp Terminal Block
Insertion
Removal
Removing and Mounting a Clamp Terminal Block
Removal
Mounting
204
Note Tighten the screws to a torque of 0.2 to 0.25 N·m.
Insert the post terminal all the way to the end in any terminal hole.
Pull out the power line while pressing down with a small flat-blade screwdriver
on the release button above the terminal hole.
The following screwdriver is recommended for use when removing cables.
Recommended Screwdriver Model
Use a flat-blade screwdriver to loosen the four screws on the top of the termi-
nal block, and then grasp the handles on both sides and remove the terminal
block.
Grasp the handles on both sides of the terminal block, and insert the terminal
block firmly in place. Then use a flat-blade screwdriver to tighten the four
screws on the top of the terminal block.
Side View
SZF1
0.6 mm
Four 2.6x6 standard screws
Model
Front View
3.5 mm
PHOENIX CONTACT
Manufacturer
1
Grasp handles on both sides.
Pull out the terminal block.
2
Section 5-7
1